Product code: SL017PL014
Free standard UK delivery | Next day delivery available
Free standard delivery within EU (terms apply) | Worldwide shipping available
If you are not 100% satisfied with your purchase, please contact us at
firstname.lastname@example.org or call +44 (0)1590 679755
The SpaceLogger.W10 (WindLogger) has been developed for economic logging of real-time wind speed and direction data when using Gill Instruments' anemometers with a single serial output and for full environmental data logging from the MetPak Weather Station.
WindLogger is compatible with the following Gill Instruments' meteorological sensors:
These sensors may be set to output in the following compatible modes:
WindLogger is also compatible with other sensors with RS232 serial output starting <STX> and ending <LF>.
For data logging NMEA data from WindSonic or MetPak sensors and for logging from other RS232 & NMEA sensors please see the SpaceLogger.S10 model.
WindLogger is ideal for field data acquisition due to its low power consumption, high capacity data storage and compact design.
Wind data is date and time-stamped and conveniently stored onto an SD card so no PC hook-up is required in the field.
A new data file (.CSV) is generated for each day's recording and when transferred to a PC, may be analysed with any standard spreadsheet program.
The WindLog.xls spreadsheet template may be used to import WindSonic data quickly to Excel.
SD and MMC cards are available with up to 2GByte capacity.
For more advice on how our SpaceLogger.W10 WindLogger can provide a solution to your data logging application as part of a full wind system, please contact our sales office.
Example of WindLogger application
With WindLogger, the logging interval may be selected from the WindSonic settings of 4, 2 or 1 reading per second, or set to one reading every 1 to 60 seconds. With a logging interval of one reading per second, using a 2GByte card, WindLogger will store up to 19 months worth of WindSonic data.
When logging from a WindSonic sensor, each data reading comprises up to 41 bytes. The following table gives the approximate capacity of various sized memory cards, depending on the logging interval selected, assuming a WindSonic sensor is connected:
Logging Interval (Readings per time interval)
|Memory Card Size||4 per sec||2 per sec||1 per sec||1 per 2 sec||1 per 5 sec||1 per 10 sec|
|1 GB||75 days||150 days||300 days||600 days||>4 years||>8 years|
|2 GB||150 days||300 days||600 days||>3 years||>8 years||>16 years|
When logging from a MetPak weather station, each data set comprises at least 75 bytes. The following table gives the approximate capacity of various sized memory cards, depending on the logging interval selected, assuming a MetPak is connected:
Logging Interval (Readings per time interval)
|Memory Card Size||1 per sec||1 per 2 sec||1 per 10 sec|
|1 GB||>150 days||>300 days||4.5 years|
|2 GB||>300 days||>600 days||9 years|
Width: 67 mm
Depth: 67 mm
Height: 28 mm (excluding optional rubber feet)
|Enclosure material||GP ABS (UL94-HB) plastic and acrylic|
Input / Output
Gill Instruments' WindSonic, WindObserver II and WindMaster
ultrasonic wind speed and direction sensors
MetPak II weather station
Other sensors with data output starting <STX> and ending <LF>
|Transmission standard||RS232 compatible, 8 bits and no parity|
|Sensor output format||
Continuous mode: ASCII UV (or UVW), Polar or Tunnel from all sensors
NMEA output from MetPak II only
|Transmission speed||9600 Baud (default) or selectable to 115200, 57600, 38400, 19200, 4800, 2400 or 1200 Baud|
|Wire acceptance||0.32 to 0.65 mm diameter (AWG 28 to 22)|
|Data Storage||Data storage card||Removable SD, MMC or MMC mobile card|
|Data capacity||2 GByte (max)|
FAT16 or FAT32 with 8.3 file names
Sector size 512 Bytes
|Data sample||Records only the data between specified start (STX) and end (ETX) characters|
|Data logging interval||
Default is to log every data sample output - e.g. as per WindSonic
setting (1, 2 or 4 readings per sec)
or select logging interval from 1 to 60 seconds
Audible / Visual
Green: Ready to record data
Red: Writing data to SD card
Two tone signal on correct card insertion
Single tone when data purge button depressed
Four bleeps per minute when time and date not set
|Real Time Clock||Accuracy||±40 ppm at 25°C|
|Power||Power requirement||7 to 30 V DC|
|Current at 12 VDC||10 mA typical|
|Supply input protection||Polarity reversal protected and internal resettable fuse – 140 mA|
|Connection options (both included)||1.3 mm centre pin DC connector, or Screwless terminals (0.32 to 0.64 mm diameter, AWG 28 to 22 conductors)|
Operating: -25°C to +70°C [or dependent on card conditions]
Storage: -40°C to +70°C
EMC Directive 89/336/EEC - CE marked
(Emissions: EN61326:1997 inc A1/A2/A3:2003, EN60945:1997
FCC/CFR 47: Part 15:2004
|The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change.|
View or download the SpaceLogger documentation in PDF format.
WindLog is an Excel spreadsheet program to enable easy download of WindLogger .CSV data files into Excel. It is particularly useful when the data files for each day exceed the maximum number of lines that can be imported into one Excel worksheet. WindLog is only compatible with data recorded by a WindLogger from WindSonic sensors.
The data output format from the WindSonic sensor must be as per the default configuration of ASCII Polar Continuous.
Each SpaceLogger is supplied with hook and loop coin fasteners and self-adhesive clear rubber feet as standard, to provide mounting options for the unit.
We can also supply the following items with your SpaceLogger logger.
Be the first to review this product, click here
Versatile dual channel RS232 logger for data sampling with time-stamping
Logging of RS232 wind and weather data with wireless upload of data to PC
Ultrasonic wind sensor for accurate wind speed & direction measurement
Measures wind speed & direction, barometric pressure, temperature, dew point & relative humidity
Digital display of wind & weather data with configurable wind speed alarm & RS485 to RS232 conversion
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Richard Paul Russell Ltd is under license. Kestrel, Kestrel Tracker, Pocket Wind, Pocket Weather and the Kestrel logos are trademarks owned by Neilsen Kellerman. Other trademarks and trade names are those of their respective owners.