Product code: WSFLEXIW1
A high quality wind monitoring system that is easy to install for immediate accurate wind measurement, complete with display to view data locally.
• Easy to install for immediate accurate wind measurement
• Measures wind speed and direction
• No moving parts, requires virtually no maintenance
• Complete 0 to 360° operation with no dead band
• Requires no calibration and is drop tested from 1m height
• 2 year warranty as standard
• WindSonic (Option 1) Wind Speed & Direction Sensor
• WindSonic Mounting Mast
• 15m RS232 Cable (between sensor & display unit)
• WS-15A Display Unit
• Power Supply Unit
The WindSonic Option 1 sensor used in this system has an RS232 output and has a cable distance of 15m. If cabling distances are longer than this we can quote as required. For cable lengths over 20m a WindSonic Option 2 sensor with RS422/485 output is required - please contact us for a quotation.
The sensor is linked with the RS232 cable to our IP65 rated WS-15A Display Unit providing a clear digital readout of wind speed and direction plus a wind direction arrow with cardinal points. The display enables set-up of an optional wind speed alarm and provides an RS232 data output to connect to a SpaceLogger W10 or SpaceLogger W8 Wireless data logger or PC.
The system comes complete with a 0.9m anodised aluminium mounting mast and mains plug power supply. 12V UK or World plug options are available.
Systems can be leased or rented, please contact us at email@example.com for more information.
Please Note: All FlexiMet systems are supplied without lightning protection as standard. Should you require additional protection for your installation, please contact us for a quotation.
Please refer to system component pages for more detailed technical specification
|WINDSONIC OPTION 1 SENSOR||Physical||Dimensions||142mm diameter x 160mm|
|Mounting||Pipe mounting 1.75 in (44.45mm) diameter|
|Material||LURAN UV stabilised black thermoplastic|
|Performance||Wind speed||Range||0 to 60 m/s (116 knots, 134 mph)|
|Accuracy||±2 % @ 12m/s|
|Wind direction||Range||0 to 359° (no dead band)|
|Accuracy||±3° @12 m/s|
|Output rate||1 output per second (1 Hz)|
|Parameters output||Polar wind speed and direction, anemometer status|
|Serial output format||Polar (speed and direction)|
|Serial output baud rate||9600|
|Power||Power requirements||From 5.5 mA @ 12 V|
|Environmental||Temperature||Operating range: -35°C to +70°C|
|Humidity||Operating range: <5% to 100% RH|
|Quality system||Manufactured within ISO9001 quality system|
|SENSOR MOUNTING MAST||Physical||Dimensions||Diameter: 44.45 mm OD
Length: 895 mm
|Material||Anodised aluminium alloy|
|Weight||0.65 kg approx|
|Construction||5 core, tinned copper conductor 24(7) AWG, 0.22mm2, PVC insulation, Cores laid up, overall aluminium/polyester foil screen, tinned copper drain wire (24AWG), PVC sheath|
|WS-15A DISPLAY UNIT||Physical||Dimensions||Width: 140mm (including mounting feet)
Depth: 100mm (including cable glands)
Height: 65mm (including mounting feet)
|Panel Dimensions||120mm x 80mm|
|Material||Light Grey ABS Polycarbonate Blend|
|Cable access||4 waterproof glands|
|Power||Power requirements||9 to 30 Vdc|
|Current at 12 Vdc||20mA to 35mA (backlight on)|
|Supply Input protection||Polarity reversal protected. Internal fuse 500mA slo-blo (Littelfuse 0454500 or equivalent)|
|Connection||Internal lever action terminals for AWG 28 to 22 conductors (0.32 to 0.65mm diameter)|
|Environmental||Temperature||Operating range: -10°C to +70°C|
|Display Operation||Display||Two line 20 character dot matrix super-twist LCD with backlight|
|Operation||5 keys on front of unit for menu navigation, data entry and control functions|
|Wind speed high/low alarm with hold on and hold off period|
|Sensor alignment adjustment|
|Wind speed measurement units selection|
|Wind direction display||Digital 3 digits with wind arrow and cardinal points|
|Wind speed display||Digital display with units selection from kts, mph, km/h, fpm, m/s|
|Sensor status||Error code displayed for sensor/communications diagnostics|
|Connectivity||Alarm output||Volt free relay output. Max 24Vdc at switching current of 0.5 amperes. Contact resistance 0.150 ohm maximum|
|Data output||RS232 for connection to a SpaceLogger.W10 (WindLogger) or other data logger, computer, communications equipment or additional WS-15A display units|
|POWER SUPPLY UNIT||Spec||Plug Type||UK or World Adaptor|
|Dimensions||Supplied with 3m cable to connect to WS-15A Display|
|Voltage||12V DC supply (suitable for mains 240 / 110 V AC input)|
The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change.
|FlexiMet Wind 1 System wiring diagram|
Our following Case Studies give an overview of how this product applies to different sectors.
Please click on the title below to read the full case study.
|Environmental Monitoring (with SpaceLogger Data Loggers)|
|Environmental Monitoring (with Wind Systems)|
|Health & Safety Monitoring|
|Marine, Ships & Harbours|