Product code: WSFLEXIWX1
A high quality weather station that is easy to install for immediate accurate wind and weather measurement, complete with display to view data locally.
The system measures a wide range of weather parameters; wind speed and direction, temperature, relative humidity, dew point and barometric pressure using the Gill MetPak. The sensor is a compact and lightweight multi-sensor meteorological instrument utilising ultrasonic technology, as used in the proven WindSonic sensor to measure wind speed and direction. Temperature and humidity are measured using industry standard probes housed in a naturally aspirated radiation shield. Barometric pressure is measured within a vented enclosure.
The MetPak sensor used in this system has an RS232 output and has a cable distance of 15 metres. If cabling distances are longer than this we can quote as required.
The sensor is linked with the RS232 cable to our IP65 rated WS-15A Display Unit providing a clear digital readout of wind speed and direction plus a wind direction arrow with cardinal points. Temperature, pressure, relative humidity and dew point are also displayed. The display enables set-up of an optional wind speed alarm and provides an RS232 data output to connect to a SpaceLogger W10 or SpaceLogger W8 Wireless data logger or PC.
The system comes complete with a 0.9m anodised aluminium mounting mast and mains plug power supply. 12V UK or World plug options are available.
Systems can be leased or rented, please contact us at email@example.com for more information.
Please Note: All FlexiMet systems are supplied without lightning protection as standard. Should you require additional protection for your installation, please contact us for a quotation.
Please refer to system component pages for more detailed technical specification
|METPAK WEATHER STATION||Physical||Dimensions||370mm height (overall)
290mm standoff (max) from face of mounting pole
|Weight||1.1 kg (including bracket)|
|Mounting||Vertical pipe mounting 25mm to 50mm diameter|
|Material||UV Stabilised white thermoplastic with gloss white painted aluminium mounting bracket (with moulded plastic V-block and stainless steel U-bolt)|
|Performance||Wind speed||Range||0.01 to 60 m/s (0.02 to 116 knots)|
|Accuracy||±2 % @ 12m/s|
|Units of measure||m/s, knots, mph, km/hr, ft/min|
|Wind direction||Range||0 to 360° (no dead band)|
|Accuracy||±3° @ 12m/s|
|Air temperature||Range||-35°C to +70°C|
|Units of measure||°C, °F or K|
|Relative humidity||Range||0-100% RH|
|Accuracy||± 0.8% @ 23°C|
|Units of measure||% RH|
|Barometric pressure||Range||600-1100 hPa|
|Units of measure||hPa. mbar, mmHg, InHg|
|Dew point||Accuracy||± 0.15°C @ 23°C ambient temp and 20°C dew point|
|Units of measure||°C or °F|
|Sensors||Wind speed & direction||WindSonic ultrasonic sensor|
|Temperature, relative humidity & dew point||Rotronic HygroClip model HC2-S3 compensated for temperature dependency.
Radiation shield 6-plate naturally aspirated
|Barometric pressure||Solid state device compensated for temperature dependency -20°C to +70°C|
|Output rate||1 Hz|
|Parameters output||Polar wind speed and direction, barometric pressure, humidity, temperature, dew point, power supply voltage, MetPak status code, checksum|
|Power||Power requirements||5 to 30 V dc
36 mA (output 1 second) @ 12 V
|Environmental||Temperature||Operating range: -35°C to +70°C|
|Humidity||Operating range: 0% to 100% RH|
|SENSOR MOUNTING MAST||Physical||Dimensions||Diameter: 44.45 mm OD
Length: 895 mm
|Material||Anodised aluminium alloy|
|RS232 CABLE||Physical||Dimensions||Diameter: 4.8mm
|Weight||0.65 kg approx|
|Construction||5 core, tinned copper conductor 24(7) AWG, 0.22mm2, PVC insulation, Cores laid up, overall aluminium/polyester foil screen, tinned copper drain wire (24AWG), PVC sheath|
|WS-15A DISPLAY UNIT||Physical||Dimensions||Width: 140mm (including mounting feet)
Depth: 100mm (including cable glands)
Height: 65mm (including mounting feet)
|Panel Dimensions||120mm x 80mm|
|Material||Light Grey ABS Polycarbonate Blend|
|Cable access||4 waterproof glands|
|Power||Power requirements||9 to 30 Vdc|
|Current at 12 Vdc||20mA to 35mA (backlight on)|
|Supply Input protection||Polarity reversal protected. Internal fuse 500mA slo-blo (Littelfuse 0454500 or equivalent)|
|Connection||Internal lever action terminals for AWG 28 to 22 conductors (0.32 to 0.65mm diameter)|
|Environmental||Temperature||Operating range: -10°C to +70°C|
|Display Operation||Display||Two line 20 character dot matrix super-twist LCD with backlight|
|Operation||5 keys on front of unit for menu navigation, data entry and control functions|
|MetPak supply voltage|
|Wind speed high/low alarm with hold on and hold off period|
|Sensor alignment adjustment|
|Wind speed measurement units selection|
|Pressure calibration setting|
|Wind direction display||Digital 3 digits with wind arrow and cardinal points|
|Wind speed display||Digital display with units selection from kts, mph, km/h, fpm, m/s|
|Sensor status||Error code displayed for sensor/communications diagnostics|
|Connectivity||Alarm output||Volt free relay output. Max 24Vdc at switching current of 0.5 amperes. Contact resistance 0.150 ohm maximum|
|Data output||RS232 for connection to a SpaceLogger.W10 (WindLogger) or other data logger, computer, communications equipment or additional WS-15A display units|
|POWER SUPPLY UNIT||Spec||Plug Type||UK or World Adaptor|
|Dimensions||Supplied with 3m cable to connect to WS-15A Display|
|Voltage||12V DC supply (suitable for mains 240 / 110 V AC input)|
The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change.
Our following Case Studies give an overview of how this product applies to different sectors.
Please click on the title below to read the full case study.
|Environmental Monitoring (with SpaceLogger Data Loggers)|
|Environmental Monitoring (with Wind Systems)|
|Health & Safety Monitoring|
|Marine, Ships & Harbours|